DJI Phantom 4 Pro Quadcopter Drone - White

DJI Phantom 4 Pro Quadcopter Drone - White

Availability: Out of stock

DJI Phantom 4 Pro Quadcopter Drone with Camera & Controller CP.PT.000488 - White
  • Item Part#: PHANTOM4PRO
  • Mfg Part#: PHANTOM4PRO
  • Manufacturer: DJI
  • Warranty: 90 DAY
  • Condition: New
  • Free Shipping: Yes
$1,375.99
Description

Details

Additional Information:

 

This DJI Phantom 4 Pro Quadcopter Drone with Camera & Controller is in great condition. (New)

 

Included in the Box:

DJI Phantom 4 Pro Quadcopter Drone with Camera & Controller

 

Packaging:

The item is securely packaged in Original box.

 

 

 

DJI Phantom 4 Pro Quadcopter Drone with Camera & Controller CP.PT.000488 - White Description:

 

The Phantom 4 Pro from DJI boasts a 3-axis-stabilized gimbal camera with a 20MP, 1" CMOS sensor capable of shooting up to 4K/60fps video and well as photo bursts at up to 14 fps. The hull has been updated from the previous Phantom 4, now featuring magnesium alloy construction for increased rigidity and reduced weight. The FlightAutonomy system adds dual rear-vision sensors plus infrared sensing for a total of five directions of obstacle sensing and four directions of obstacle avoidance. Compared to the Phantom 4 Advanced variant, the Pro features the noted four, rather than two, directions of obstacle avoidance and offers a 5.8 GHz channel for the Lightbridge link, in addition to 2.4 GHz.

 

 

DJI Phantom 4 Pro Quadcopter Drone with Camera & Controller CP.PT.000488 - White Features:

 

Gimbal Camera with 1" CMOS Sensor

The onboard camera features a first for the Phantom line: a 1-inch 20-megapixel CMOS sensor. A custom-engineered lens made up of eight elements is arranged in seven groups. The camera boasts a mechanical aperture that eliminates rolling shutter distortion that can occur when taking images of fast moving subjects or when flying at high speed and a mechanical focus.

1" CMOS Sensor

Sensor size is often more important to image quality than the number of pixels, because a larger sensor has dynamic range, better signal-to-noise ratio, and boosted low light performance. The 1" 20MP CMOS sensor in the Phantom 4 Pro is almost four times the size of the Phantom 4's 1/2.3" sensor. It uses larger pixels and has a maximum ISO of up to 12,800 as well as increased contrast.

H.264 and H.265 4K Video Recording

Powerful video processing supports H.264 4K videos at 60 fps or H.265 4K at 30 fps, both recorded in a 100 Mbps bitrate. Advanced sensors and processors ensure everything is captured with more image detail and the image data needed for manipulation in post-production.

Production-Optimized 4K

An enhanced video processing system allows video to be captured in cinema- and production- optimized DCI 4K (4096 x 2160) at 60 fps and a bitrate of 100 Mbps. The Phantom 4 Pro also supports the H.265 video codec at 30 fps in 4K resolution. For a given bitrate, H.265 doubles the amount of image processing as H.264, resulting in significantly enhanced image quality from a more efficient compression. Record in the high dynamic range D-log mode to make the most of this image data for color grading.

High Resolution Lens

The Phantom 4 Pro camera has an aerial-optimized f/2.8 wide-angle lens with a 24 mm equivalent focal length. It features eight elements — two aspherical — arranged in seven groups that fit into a smaller, more compact frame. Its images are consistently detailed with low distortion and low dispersion, ensuring that photos and videos are sharp and vivid.

Mechanical Shutter

Capturing objects moving at high speed has always been a challenge for flying cameras using an electronic shutter. This is why the Phantom 4 Pro is the first DJI Phantom to use a mechanical shutter and a large-aperture prime lens. A maximum mechanical shutter speed of 1/2000-second eliminates motion blur and "jello effect" caused by shooting a fast moving object with a rolling electronic shutter. The electronic shutter has also been improved with a max shutter speed of 1/8000-second, and a there is Burst Mode shoot capable of shooting 14 fps at 20 megapixels to catch the perfect moment.

Remote Controller with Lightbridge HD Video Link

The Phantom 4 Remote Controller Included controller integrates an upgraded Lightbridge HD video transmission system that adds 5.8 GHz transmission support. The ability to choose between 2.4 GHz and 5.8 GHz allows pilots to cut through interference and eliminates image lag caused when flying in an area with extensive 2.4 GHz frequency use. Normally, Wi-Fi video transmission systems use a 2.4 GHz frequency to work with a controller using a 5.8 GHz frequency, as this prevents interference that can occur when both use the same frequency.

Lightbridge HD Video Link

The Lightbridge HD video transmission system used in the Phantom 4 Pro uses TDM (Time Division Multiplexing) to transmit signals, allowing it to send controller signals and receive video transmission signals at the same frequency. As the 2.4 GHz frequency band is often affected by Wi-Fi, 4G cell towers, and other types of interference in urban areas, a 5.8 GHz band will increase transmission reliability. When switched on, the Phantom 4 evaluates local signal levels, automatically choosing the transmission frequency with the lowest level of interference. This enables a maximum video transmission range of 4.3 miles.

Intelligent Flight Modes

Draw

With Draw, simply draw a route on screen and the Phantom 4 Pro will move in that direction while keeping its altitude locked. This allows the pilot to focus on camera control and enables more complex shots. There are two Draw modes that can be used in different scenarios: 

 

Standard: The aircraft follows the route at a constant speed with the camera facing in the direction of flight.

 

Free: The aircraft only 

 

 

DJI Phantom 4 Pro Quadcopter Drone with Camera & Controller CP.PT.000488 - White Specifications:

 

Performance
Maximum Horizontal Speed S-Mode: 45 mph (72 km/h)
A-Mode: 36 mph (58 km/h)
P-Mode: 31 mph (50 km/h)
Maximum Ascent Speed S-Mode: 19.7 ft/s (6 m/s)
P-Mode: 16.4 ft/s (5 m/s)
Maximum Descent Speed S-Mode: 13.1 ft/s (4 m/s)
P-Mode: 9.8 ft/s (3 m/s)
Hovering Accuracy Vertical:
Vision Positioning: ±0.3' / 0.1 m 
GPS Positioning: ±1.6' / 0.5 m 
Horizontal:
Vision Positioning: ±1' / 0.3 m
GPS Positioning: ±4.9' / 1.5 m
Maximum Tilt Angle S-Mode: 42° 
A-Mode: 35° 
P-Mode: 25°
Flight Time Up to 30 minutes
Flight Control System
GNSS GPS
GLONASS
Vision Positioning
Velocity Range Up to 31 mph (50 km/h) at 6.6' (2 m) above ground level
Altitude Range 0 to 33' / 0 to 10 m above ground level
Operating Range 0 to 33' / 0 to 10 m above ground level
Obstacle Sensory Range 2 to 98' / 0.7 to 30 m
Field of view (FOV) Horizontal: ±60°
Vertical: ±54°
Detection Frequency 10 Hz
Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux)
TOF Sensing System
Obstacle Sensory Range 0.6 to 23' / 0.2 to 7 m
Field of View Horizontal: ±35°
Vertical: ±10°
Detection Frequency 10 Hz
Operating Environment Surface with diffuse reflection material, and reflectivity > 8% (such as wall, trees, humans, etc.)
Transmitter (Remote Controller)
Frequency 2.400 to 2.483 GHz
5.725 to 5.850 GHz
Communication Distance 4.3 miles / 7 km
Operating Current 2.4 GHz: 23 dBm
5.8 GHz: 30 dBm
Power Consumption 1.2 A at 7.4 V
Battery Type: Built-in
Chemistry: Lithium-ion polymer (LiPo)
Capacity: 6000 mAh
Configuration: 2S
Mobile Device Holder Compatiblity: Tablets and smartphones
Operating Temperature 32 to 104°F / 0 to 40°C
Camera
Sensor 1" CMOS
Effective Pixels 20 million
Lens FOV (Field of View): 84°
Focal Length: 8.8 mm / 24 mm (35 mm format equivalent)
Aperture: f/2.8 - f/11
Focus Distance (Auto Focus): 3.3' (1 m) to ∞
Photo Resolution Still Photo Mode:
3:2 Aspect Ratio: 5472 x 3648<br style="box-sizing: border-box; -webkit-fo
Reviews

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Warning! Computers and computer circuit boards, as well as other electronic equipment, contain lead, which is a chemical known to the State of California to cause cancer or cause birth defects and other reproductive harm. Please wash hands after handling circuit boards and other internal components of computers and electronic equipment, and avoid inhalation of fumes if heating the solder on the internal components or circuit boards.